RSX/Civic/TSX Hybrid Racing Shifter Cable Bushings
Installed some used Hybrid Racing Shifter Cable Bushings. This has a spherical bearing in the larger bushing that moves vertically. Most cheaper bushing kits use a solid piece of aluminum or delrin. Hybrid Racing has good step by step instructions here.

Pictures of the bushings



Stock bushings

Undo and remove the stock cotter pin

Pry out the stock bushing with either a screw driver or pliers

Bushing and two washers

Insert new bushing

Spin on spiral retaining ring on the other side

Reinstall cable onto transmission

I added the washers back (not necessary as the spiral rings will hold the bushings in place) and installed cotter pins

Repeat the same on the second bushing







Done!


Shift harder